Technical Terms

: strand conductor construction

: finest-strand construction

: plastic based on PVC

: plastic based on PE

: plastic based on PP

: national abbreviation for temperature-resistant plastic based on PVC

: Kunststoff auf PUR-Basis

: plastic based on TPE-E

: thermoplasic natural rubber

: temperature-resistant thermoplasic elastomer

: special temperature-resistant thermoplasic elastomer

: radial distributed PVC

: cross-linked polyehylene

: radial distributed PUR

: suitable for dragchains

: flame retardant and halogen-free wire

: including green-yellow ground wire

: without green-yellow ground wire

: coloured wires

: number print

: screening meshwork

: harmonised wires

: special wires

: nominal voltage Uo/U 300/300 V

: nominal voltage Uo/U 300/500 V

: nominal voltage Uo/U 450/750 V

: PVC based wire insulation

: PVC based sheath material

: harmonised abbreviation for temperature-resistant PVC (+ 90° C)

: finely-wired construction of bunched conductors according to DIN VDE 0281

: twisted wire with three wires and green-yellow ground wire

: 0,75 mm² conductor cross section

: automotive wire, low voltage

: automotive wire, high voltage, (ignition line)

: PVC, polyvinyl chloride

: foil shield with ground wire

: copper-based single wire shield

: copper screen

: fibre glass mesh

: textile weave

: 4 reduced insulation thickness according to DIN ISO 6722, Part 4

: ultra reduced insulation thickness

: insulation thickness bigger than according to DIN ISO 6722, Part 3

: non-seperable flat wire

: multiple core, non-separable wire

: other conductor materials than E-Cu or resistance alloies

: resistance conductor

: conductor cross section 0,5 mm²

: conductor cross section 0,5 mm², tinned

: three wires with conductor cross section 0,5 mm² each

: on resistance conductors information in Ohm/km

: FL = automotive wire
  R = with reduced insulation thickness
  Y = PVC insulation

  2,50 mm² verz = conductor cross section 2,50 mm² tinned


: FL = automotive wire

  11Y = PUR sheath

  16,00 mm² blk = conductor cross section 16,00 mm² bare

: FL = automotive wire
  R = with reduced insulation thickness
  Y = wire insulation PVC based

  Y = sheath insulation PVC based

  3 x 0,25 mm² blk = three single wires with cross conductor section 0,25 mm² each,    bare